Nortel Alteon OS 40M2420 Command Reference Manual page 224

Alteon OS Command Reference
Table 6-37 802.1x Port Configuration Menu Options (/cfg/l2/8021x/port)
Command Syntax and Usage
svrtmout <1-65535>
Sets the time, in seconds, the authenticator waits for a response from the RADIUS server before
declaring an authentication timeout. The default value is 30 seconds.
The time interval between transmissions of the RADIUS Access-Request packet containing
the supplicant's (client's) EAP-Response packet is determined by the current setting of
/cfg/sys/radius/timeout (default is 3 seconds).
maxreq <1-10>
Sets the maximum number of times the authenticator retransmits an EAP-Request packet to the
supplicant (client). The default value is 2.
raperiod <1-604800>
Sets the time, in seconds, the authenticator waits before re-authenticating a supplicant (client)
when periodic re-authentication is enabled. The default value is 3600 seconds.
reauth on|off
Sets the re-authentication status to on or off. The default value is off.
default
Resets the 802.1x port parameters to their default values.
global
Applies current global 802.1x configuration parameters to the port.
cur
Displays current 802.1x port parameters.
224 Chapter 6: The Configuration Menu 40M2420, April 2007