Static Multicast Router - Nortel Alteon OS 42C4911 Application Manual

Alteon OS Application Guide
These commands display information about IGMP Groups and Mrouters learned through
IGMP Snooping.

Static Multicast Router

A static multicast router (Mrouter) can be configured for a particular port on a particular
VLAN. A static Mrouter does not have to be learned through IGMP Snooping.
A total of 16 static Mrouters can be configured on the GbESM. Both internal and external ports
can accept a static Mrouter.
When you configure a static Mrouter on a VLAN, it replaces any dynamic Mrouters learned
through IGMP Snooping.
Configure a Static Multicast Router
1. Configure a port to which the static Multicast Router is connected, and enter the appro-
priate VLAN.
>> /cfg/l3/igmp/mrouter
>> Static Multicast Router# add EXT4
Enter VLAN number: (1-4093) 1
Enter the version number of mrouter [1|2]: 2 (Enter the IGMP version number)
2. Apply, verify, and save the configuration.
>> Static Multicast Router# apply
>> Static Multicast Router# cur
>> Static Multicast Router# save
164 Chapter 10: IGMP
(Select IGMP Mrouter menu)
(Add port EXT4 as Static Mrouter port)
(Enter the VLAN number)
(Apply the configuration)
(View the configuration)
(Save your changes)
42C4911, January 2007