Igmp Filter Definition - Nortel Alteon OS 40M2420 Command Reference Manual

Layer 2/3 gbe switch module for ibm bladecenter version 1.3
Table of Contents

Advertisement

Alteon OS Command Reference
/cfg/l3/igmp/igmpflt/filter <filter number>

IGMP Filter Definition

[IGMP Filter 1 Definition Menu]
Table 6-91
Table 6-91 IGMP Filter Definition Menu Options (/cfg/l3/igmp/igmpflt/filter)
Command Syntax and Usage
range <IP multicast address (such as 224.0.0.10)> <IP multicast address>
Configures the range of IP multicast addresses for this filter.
action allow|deny
Allows or denies multicast traffic for the IP multicast addresses specified.
ena
Enables this IGMP filter.
dis
Disables this IGMP filter.
del
Deletes this filter's parameter definitions.
cur
Displays the current IGMP filter.
292
Chapter 6: The Configuration Menu
range
- Set IP Multicast address range
action
- Set filter action
ena
- Enable filter
dis
- Disable filter
del
- Delete filter
cur
- Display current IGMP filter configuration
describes the commands used to define an IGMP filter.
40M2420, April 2007

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alteon osGbesm

Table of Contents