Summary Of Instructions - Omron SYSMAC CP Series Instruction & Reference Manual

1 Summary of Instructions

1-1 Summary of Instructions
There are 200 types of instructions can be used by CP1E.
The following table lists the instructions by function. Refer to the reference pages for the
detail of each instruction.
Instrucion
Instruction
Type
Sequence LOAD
Input Instruc-
tions
LOAD NOT
AND
AND NOT
OR
OR NOT
AND LOAD
OR LOAD
NOT
CONDITION ON
CONDITION OFF
1-2
FUN
Mnemonic
No.
LD - Indicates a logical start and creates an ON/OFF execution condition based on
the ON/OFF status of the specified operand bit.
@LD -
%LD -
!LD -
!@LD -
!%LD -
LD NOT - Indicates a logical start and creates an ON/OFF execution condition based on
the reverse of the ON/OFF status of the specified operand bit.
@LD NOT -
%LD NOT -
!LD NOT -
!@LD NOT -
!%LD NOT -
AND - Takes a logical AND of the status of the specified operand bit and the current
execution condition.
@AND -
%AND -
!AND -
!@AND -
!%AND -
AND NOT - Reverses the status of the specified operand bit and takes a logical AND with
the current execution condition.
@AND NOT -
%AND NOT -
!AND NOT -
!@AND NOT -
!%AND NOT -
OR - Takes a logical OR of the ON/OFF status of the specified operand bit and the
current execution condition.
@OR -
%OR -
!OR -
!@OR -
!%OR -
OR NOT - Reverses the status of the specified bit and takes a logical OR with the current
execution condition.
@OR NOT -
%OR NOT -
!OR NOT -
!@OR NOT -
!%OR NOT -
AND LD - Takes a logical AND between logic blocks.
OR LD - Takes a logical OR between logic blocks.
NOT 520 Reverses the execution condition.
UP 521 UP(521) turns ON the execution condition for one cycle when the execution
condition goes from OFF to ON.
DOWN 522 DOWN(522) turns ON the execution condition for one cycle when the execution
condition goes from ON to OFF.
Function
CP1E CPU Unit Instructions Reference Manual(W483)
Page
2-7
2-7
2-9
2-9
2-11
2-11
2-13
2-13
2-16
2-17
2-17