Manual Structure - Omron SYSMAC CP Series Instruction & Reference Manual

Manual Structure

Page Structure and Icons
The following page structure and icons are used in this manual.
Level 2 heading
Level 3 heading
Step in a procedure
Indicates a step in a
procedure.
Special Information
(See below.)
Icons are used to indicate
precautions and
additional information.
Manual name
This illustration is provided only as a sample and may not literally appear in this manual.
Special Information
Special information in this manual is classified as follows:
Precautions for Safe Use
Precautions on what to do and what not to do to ensure using the product safely.
Precautions for Correct Use
Precautions on what to do and what not to do to ensure proper operation and performance.
Additional Information
Additional information to increase understanding or make operation easier.
References to the location of more detailed or related information.
CP1E CPU Unit Instructions Reference Manual(W483)
5-2 Installation
5-2-1 Installation Location
DIN Track Installation
1
Use a screwdriver to pull down the DIN Track mounting pins from the back of the Units to release
them, and mount the Units to the DIN Track.
DIN Track mounting pins
Release
2
Fit the back of the Units onto the DIN Track by catching the top of the Units on the Track and then
pressing in at the bottom of the Units, as shown below.
DIN Track
3
Press in all of the DIN Track mounting pins to securely lock the Units in place.
DIN Track mounting pins
Precautions for Correct Use
Tighten terminal block screws and cable screws to the following torques.
M4: 1.2 N·m
M3: 0.5 N·m
CP1E CPU Unit Hardware User's Manual(W479)
Level 1 heading
5 Installation and wiring
Level 2 heading
Level 3 heading
Gives the current
headings.
Page tab
5
Gives the number
of the section.
5 - 3
5