Shooting And Recording/Playback Functions Section - Panasonic P2HD AG-3DP1G Operating Instructions Manual

Shooting and Recording/Playback Functions Section

1 2 3
7 8 9 10 1112 13 14 15
 Shooting and Recording (camera unit)
1 Focus ring
Use this using to adjust the focus manually.
2 Zoom ring
Use this using to adjust the zoom manually.
3 Iris ring
Use this using to adjust the lens iris manually.
4 ZOOM lever
Use this lever to perform zoom operations.
Zoom in
T:
Zoom out
W:
Press the lever lightly to change the zoom slowly, and
hard to change it quickly.
5 IRIS selector switch
Use this switch to select the lens iris adjustment mode.
Manual iris mode
M:
To adjust the iris, turn the iris ring on the lens.
Auto iris mode
W:
The lens iris is adjusted automatically.
6 IRIS (PUSH AUTO) button
Press this button in manual iris mode. The lens iris is
adjusted automatically while you hold down the button.
7 CONV. (convergence) dial
Use this dial to adjust the convergence point (depth of
the reference place for the 3D image).
For details, refer to [Adjusting the Convergence Point]
(page 54).
 NOTE
Lens operations such as iris, zoom, focus, and
convergence adjustments cannot be performed during
synchronization with the GENLOCK input signal.
8 ND FILTER (filter switching) selector button (
Use this button to adjust the amount of light entering the
MOS sensor during shooting in strong outdoor lighting.
16 17 18
9 SHUTTER switch
10 AUTO W/B (white/black) BAL switch
)
4 5 6
19
Setting
Does not use the ND filter.
1 CLEAR
Reduces the amount of light
2 1/4
entering the MOS sensor to 1/4.
Reduces the amount of light
3 1/16
entering the MOS sensor to 1/16.
Reduces the amount of light
4 1/64
entering the MOS sensor to 1/64.
Use this switch to turn the electronic shutter on and off.
The electronic shutter is off.
OFF:
The electronic shutter is on.
ON:
Changes the speed of the electronic shutter.
SEL:
This dial switch returns to its original position when
released. Each push in the SEL direction changes the
shutter speed.
For details, refer to [Setting the Electronic Shutter]
(page 48).
Automatically adjusts the white balance.
AWB:
Set the WHITE BAL switch on the side to A
or B and use this switch to adjust the white
balance, which takes a few seconds. The
adjusted value is stored in memory.
When the WHITE BAL switch is set to PRST
and the AUTO W/B BAL switch is set to AWB
to indicate the color temperature, pushing
the AUTO W/B BAL switch towards AWB a
second time allows you to change the preset
color temperature.
Automatically adjusts the black balance.
ABB:
For details, refer to [Adjusting the White Balance and
Black Balance] (page 46).
Description
1