Use Of The External Dc Power Supply - Panasonic P2HD AG-3DP1G Operating Instructions Manual

When using a V-mount type battery
1
 MounttheV-mountadapterplate.
Insert the plate and slide it as shown below.
• To remove the plate, slide the release lever
downwards.
2
 Setthebatterytype.
• Select the battery type listed under BATTERY
SELECT. Select the menu option BATTERY
SELECT from the setting menu BATTERY SETUP
screen.
• When using a battery not listed under BATTERY
SELECT, select TYPE A or TYPE B and set each
item according to the battery characteristics.
For details, refer to [BATTERY SETUP Screen]
(page 117).
 NOTE
• For information about the V-mount adapter plate, please
contact the store where you purchased the camera-recorder.
• With the V-mount adapter plate installed, % (percent) values
cannot be displayed when using batteries that show the
remaining battery capacity.
Use of the External DC Power
Supply
1

2

Releaselever
3

ConnecttheexternalDCpowersupplytothe
DCINsocketontheunit.
DCINsocket
ExternalDC
powersupply
Turn"ON"thepowerswitchoftheexternalDC
powersupply.(Ifthepowerswitchisavailable
ontheexternalDCpowersupply)
Turnthecamera-recorderpowerswitchON.
DCcable
5