Table of Contents
Advertisement
OUTPUT SEL Screen
Item
SDI OUT
Selects the signal to be output from the HD SDI OUT
1 (L)/2 (R) connectors and HD SDI MONITOR OUT
connector.
ON: The HD SDI OUT 1 (L)/2 (R) connectors output
the left-lens (L) image and the right-lens (R) image.
The HD SDI MONITOR OUT connector outputs the
same image as that selected with the menu option
MONTIOR OUT SEL.
ON (SIDE): The HD SDI OUT 1 (L)/2 (R) connectors
output the SIDE by SIDE image. The HD SDI
MONITOR OUT connector outputs the same image
as that selected with the menu option MONTIOR OUT
SEL.
OFF: The HD SDI OUT 1 (L)/2 (R) connectors and the
HD SDI MONITOR OUT connector output no signals.
If a monitor is connected to the HDMI connector, an
image compatible with the monitor is output from the
HDMI connector.
MON OUT SEL
Selects the image to be output from the HD SDI
MONITOR OUT connector and HDMI connector.
NORMAL: The same image as that displayed on the
LCD monitor is output.
L: The left-lens (L) image is output.
MIX: The mixed left-lens (L) image and right-lens (R)
image is output.
SIDE: The SIDE by SIDE image is output.
TC OUT
Sets the time code type output from the TC OUT
connector.
TCG: Outputs the time code generator value of the
camera at all times.
TCG/TCR: Outputs time code generator value during
camera recording and outputs the played back time
code during video playback.
DISPLAY SETUP Screen
Item
EVF PEAK LEVEL
Adjusts the peaking level of the LCD monitor and
viewfinder.
-7 ... 0 ... +7
EVF PEAK FREQ
Adjusts the peaking frequency of the LCD monitor and
viewfinder.
HIGH, LOW
LCD SETTING
Makes it possible to set video color level, brightness
and contrast displayed in the LCD monitor in a
subscreen.
(Subscreen)
LCD COLOR LEVEL
LCD BRIGHTNESS
LCD CONTRAST
LCD BACKLIGHT
Adjusts LCD monitor backlight brightness.
HIGH, NORMAL, LOW
11
Setting
Setting
Notes
• No signals are output from the HDMI
connector when this item is set to ON
or ON (SIDE).
• When SDI OUT is set to OFF, no image
is output from the HD SDI MONITOR
OUT connector, regardless of this item
setting. When you wish to output the
effect of the 3D assist function, set
SDI OUT to a setting other than OFF
and this item to NORMAL. (The signal
of the 3D assist function is not output
from the HDMI connector.)
Notes
____ indicates the factory setting
Advertisement
Table of Contents
