Assigning Functions To User Buttons - Panasonic P2HD AG-3DP1G Operating Instructions Manual

Assigning Functions to USER Buttons

The USER MAIN, USER1, and USER2 buttons can be
assigned user-selected functions.
Use the menu options USER MAIN, USER1, and USER2 to
assign functions to respective button. Select these items
from the setting menu SW MODE screen.
SW MODE
LOW GAIN
MID GAIN
HIGH GAIN
USER MAIN
USER1
USER2
RET
LCD/EVF
PUSH MENU TO RETURN
Selectable Functions
• PUSH AF:
Assigns temporal auto focusing while holding
the PUSH AF button down.
• Y GET:
Assigns a function that displays the brightness
level at the center of the image.
• SHOT MARK:
Assigns the shot marker function.
• REC CHECK:
Assigns the REC CHECK function.
• R CONV:
Assigns a function that controls the convergence
point adjustment from the extension control
unit (AG-EC4G) connected to the REMOTE
connector. (USER MAIN and USER1 buttons
only)
• 3D A.Z WFM:
Assigns a 3D assist function Z.WFM.
• 3D A.ALERT:
Assigns a 3D assist function ALERT.
• 3D A.CONV.:
Assigns a 3D assist function CONV.
 NOTE
The default settings are listed below.
• USER MAIN: PUSH AF
• USER1: Y GET
• USER2: SHOT MARK
50
0dB
6dB
12dB
PUSH AF
Y GET
SHOT MARK
REC CHECK
MIX/R