Adjustment Between Two Lenses (3D Fine Function) - Panasonic P2HD AG-3DP1G Operating Instructions Manual

 NOTE
• The 3D assist function is disabled when the LCD/EVF mode
is set to MIX, SIDE or R IMAGE.
• The 3D ASSIST buttons are disabled in 2D LL recording
mode.
• Any 3D recording of a flat image or repetitive pattern may not
be reproduced with correct depth information.
Adjustment between Two Lenses
(3D FINE Function)
As the left and right lenses are linked, you normally do not
have to adjust them.
If you wish to perform fine adjustments between the two
lenses, the 3D FINE function allows you to adjust the
vertical position of the images, focus, and iris.
When the SHIFT button is pressed, the functions of the
menu/thumbnail operation buttons change for the 3D FINE
function.
 NOTE
• The 3D FINE screen is not displayed during recording.
Perform the 3D FINE adjustment before recording.
• The appropriate adjustment range varies depending on
the zoom position. If you have changed the zoom position,
perform readjustment.
d c b a
a SHIFT (3D FINE) button
b Cursor and SET (RESET) buttons
c EXIT (IRIS) button
d THUMBNAIL (IRIS) button
1
 Performzoom,focus,and/orbrightness
adjustment.
2
 PresstheSHIFT(3DFINE)button.
The fine adjustment screen is displayed.
3
 Adjustthefollowingfineadjustmentsas
necessary.
Vertical position of the images (VERTICAL)
Press the cursor button r or e. The image from the
right lens moves downwards by pressing r, and
upwards by pressing e.
5