Table of Contents
Advertisement
Item
TIME ZONE
Sets the time difference relative to Greenwich Mean
Time (GMT).
–12:00 ... 0:00 ... +13:00
For details, see [Setting Date and Time of Internal
Clock] (page 28).
H PHASE
Adjusts the horizontal phase when phase is locked to
the signal input to the GENLOCK IN connector.
–512 ... 0 ... +511
GENLOCK SEL
Selects the GENLOCK input.
GENLOCK IN: Signal input to the GENLOCK IN
connector (HD Tri-level sync)
RETURN IN: Signal input to the RETURN IN connector
(HD SDI)
MENU INIT
Restores all setting menu values including all scene
files 1 – 6 and the user file to their factory defaults.
DIAGNOSTIC Screen
Item
VERSION
Indicates the version of the firmware used in this
camera.
A subscreen provides details on which firmware
versions are used.
(Subscreen)
CAM SOFT: Software of the camera microprocessor
SYSCON SOFT: Software of the system control
microprocessor
P2CS BL2-1: Boot program 1 of the P2 control
microprocessor
P2CS BL2-2: Boot program 2 of the P2 control
microprocessor
P2CS KR: Kernel of the P2 control microprocessor
P2CS AP: Application software of the P2 control
microprocessor
VUP: Software of the system that totally updates the
firmware of this product
VUP FS: File system for updating this product
CAM FPGA: Configuration ROM of the camera FPGA
CAMIO FPGA: Configuration ROM of the camera IO
FPGA
AVIO FPGA: Configuration ROM of the AVIO FPGA
PQCONT FPGA: Configuration ROM of the PQ control
FPGA
MODEL NAME
Indicates the model name of this camera.
SERIAL NO.
Indicates serial number of this camera. (xxxxxxxxxx)
OPERATION
Indicates the time of the camera has been on. (xxxx h)
OPTION MENU Screen
Open this menu by holding down the DISP/MODE CHK button and when shooting status appears press the front MENU
button.
Item
AREA SELECT
Selects the TV system for the area where you use the
camera.
NTSC: Selects the NTSC area.
PAL: Selects the PAL area.
10
Setting
Setting
Setting
Notes
• This setting cannot be initialized by
performing the MENU INIT option and
the INITIAL option in USER FILE.
• Hold down the JOG dial button and
turn it downwards or upwards and
maintain this position to quickly
change values.
• The TIME ZONE setting does not
return to its factory default.
Notes
Notes
____ indicates the factory setting
Advertisement
Table of Contents
