The one exception to this procedure is the Sun keyboardʹs Stop character.
To generate Stop with a PS/2 keyboard, hold down the Pause/Break key
and press the letter A.
Changing the Keyboard Layout Settings
Different language versions of keyboards are provided for use in
different countries. For example, the layout of a French keyboard is
different from that of a US English keyboard. The Paragon CIMs enable
you to change the keyboardʹs layout setting to match your keyboard if
you are not using a US English keyboard (the factory default). Please note
that different CIMs come with different keyboard setting methods so you
should change your keyboard setting based on the CIMs.
USB Keyboard Layout Settings (P2CIM-AUSB,
P2CIM-AUSB-B or P2ZCIM-USB)
When you attach the server with a USB CIM and your keyboard is not US
English (code 33), you will have to change the keyboard layout setting.
You need to press different hot key combinations to enter the setting
mode based on your CIM types.
1. Select the channel of the desired server in the Selection Menu, and
2. Activate a text editor, such as Notepad, on the server.
3. Press Left Ctrl + NumLock to enter the setting mode. A message
Appendix F: Extra Keyboard/Mouse Information and Settings
While pressing a character
hotkey, press this PS/2
keyboard key...
* on the keypad
+ on the keypad
‐ on the keypad
press Enter.
similar to the following appears in the text editor.
...to generate this Sun
keyboard keystroke:
Compose
Vol +
Vol ‐
201