Keyboard - Raritan Dominion KX III User Manual

Keyboard

Send Ctrl+Alt+Del Macro
Due to its frequent use, a Ctrl+Alt+Delete macro is preprogrammed.
Selecting Keyboard > Send Ctrl+Alt+Del, or clicking on the Ctrl+Alt+Delete
button in the toolbar sends this key sequence to the server or to the
KVM switch to which you are currently connected.
In contrast, if you were to physically press the Ctrl+Alt+Del keys, the command
would first be intercepted by your own PC due to the structure of the Windows
operating system, instead of sending the key sequence to the target server as
intended.
Send LeftAlt+Tab (Switch Between Open Windows on a Target Server)
Select Keyboard > Send LeftAlt + Tab to switch between open windows on the
target server.
Setting CIM Keyboard/Mouse Options
To access the DCIM-USBG2 setup menu:
1. Put the mouse focus on a window such as Note Pad (Windows
system) or an equivalent.
2. Select Set CIM Keyboard/Mouse options. This is the equivalent of sending
the Left-Control and Num Lock to the target. The CIM setup menu options
are then displayed.
3. Set the language and mouse settings.
4. Exit the menu to return to normal CIM functionality.
Send Text to Target
To use the Send Text to Target function for the macro:
1. Click the Keyboard > Send Text to Target. The Send Text to Target dialog
appears.
2. Enter the text you want sent to the target.
Note: Non-English characters are not supported by the Send Text to Target
function.
3. If the target uses a US/International keyboard layout, select the "Target
system is set to the US/International keyboard layout" checkbox.
4. Click OK.
Chapter 5: KVM Clients
operating
®
45