Replacing Or Reconnecting The Usb Mouse; Changing The Keyboard Layout Settings - Raritan Paragon II User Manual

Chapter 5: Information about Keyboard, Mouse and Video

Changing the Keyboard Layout Settings

48
If you do not follow the procedure described in this section, the
keyboard and mouse may function abnormally. When the problem
occurs, power cycle the user station to resolve it.

Replacing or Reconnecting the USB Mouse

It is likely that you need to replace the mouse or swap it to a different USB
port after completing the initial connection of the USB Combo keyboard
and USB mouse. When this occurs, follow the procedure in this section to
replace or reconnect the mouse. There are two ways.
To replace or reconnect the USB mouse when the user station is
turned OFF
1. Turn OFF the user station.
2. Now swap the USB mouse to another USB port on the keyboard or
make a replacement for the mouse.
3. Turn ON the user station.
To replace or reconnect the USB mouse when the user station is
turned ON
1. Disconnect the USB Combo keyboard from the user station.
2. Now swap the USB mouse to another USB port on the keyboard or
make a replacement for the mouse.
3. Reconnect the USB Combo keyboard to the user station.
If you do not follow the procedure described in this section, the
keyboard and mouse may function abnormally. When the problem
occurs, power cycle the user station to resolve it.
Different language versions of keyboards are provided for use in different
countries. For example, the layout of a French keyboard is different from
that of a US English keyboard. The Paragon CIMs enable you to change
the keyboard's layout setting to match your keyboard type if you are not
using a US English keyboard (the factory default). Please note that
different types of CIMs come with different keyboard setting methods so
you should change the keyboard setting based on the CIMs.