Changing Serial Settings - Raritan DOMINION KSX User Manual

C 3: R R C (RRC) 39
HAPTER ARITAN EMOTE LIENT
A terminal window displaying the console output of the serial device connected to Dominion
KSX will appear, and the icon found next to the serial port entry on the RRC Navigator will turn
green.
Note: Dominion KSX Serial Console access supports only VT100 terminal emulation; be sure
your serial device is appropriately configured before connecting to Dominion KSX.
Note: If using Windows XP, Service Pack 1, the serial console will not appear if you have two
conflicting Java virtual machines installed on your system (i.e., one from Sun Microsystems, and
on from Microsoft).
Upon connecting remotely to the selected serial console port, your keystrokes will be transmitted
directly to that serial console port.

Changing Serial Settings

You may change the serial terminal settings such as baud rate, parity, and stop bits used by
Dominion KSX to communicate with your serial device, by right-clicking on the serial port entry
in the
RRC Navigator, and selecting Serial Parameters in the menu. Click on the [OK] button when
finished.