Standard Extender Kit Installation - Tripp Lite B126-1P0-WP-1 Owner's Manual

Standard Extender Kit Installation

Notes:
1) Test to make sure the entire installation works properly before pulling
cables through ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid
wire Cat5e/6 cable. Using stranded wire Cat5e/6 cable, or cable
with a gauge (AWG) size higher than 24 AWG, will result in shorter
extension distance. Higher gauge cabling, such as 26 AWG, has a
more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire
cabling.
3) The B126-1A1 and B126-1A1-WP are set to transmit a stereo audio
signal by default. Press the Audio button on the local unit to switch to
7.1-channel surround-sound audio.
4) The installation diagram shows a B126-1A1 unit. The B126-1A1-WP
installation is the same, except there is no local monitor port.
OPTIONAL LOCAL
201109206-93-3023-EN.indd 8
MONITOR
BLU-RAY
LOCAL
TRANSMITTER
Up to 200 ft. at 1080i (60Hz)
Up to 150 ft. at 1080p (60Hz)
REMOTE
RECEIVER
8
10/24/2011 10:01:20 AM