Standard Extender Kit Installation - Tripp Lite B127-1A1-DH Owner's Manual

Standard Extender Kit Installation

Notes:
• Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
• To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG. will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series Cat6 cables use 24 AWG solid-wire cabling.
• The installation diagram shows a B127-1A1-DH unit.
• External power is not required for the remote receiver due to Power-over-Cable
(PoC) technology incorporated in the transmitter unit.
1-458-93393A.indb 6
B127-1A1-DH
Extender Kit
MONITOR
Up to 125 ft. (38 m) at 4K/60 Hz
LOCAL
TRANSMITTER
1
Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz
2
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
3
Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60 Hz
PC
6
REMOTE
RECEIVER
3/8/2019 2:42:22