Table of Contents
Advertisement
Notes:
1) Test to make sure the entire installation works properly before pulling
2) To achieve maximum distance and performance, use 24 AWG solid
3) The B126-004 is set to transmit a stereo audio signal by default.
4) Using the B126-1A0 and B126-1A0-WP-1, a 1080i (60 Hz) signal
201109206-93-3023-EN.indd 19
Extender/Splitter Daisy-Chain Installation
cables through ceilings/walls.
wire Cat5e/6 cable. Using stranded wire Cat5e/6 cable, or cable
with a gauge (AWG) size higher than 24 AWG, will result in shorter
extension distance. Higher gauge cabling, such as 26 AWG, has a
more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series cables are made with 24 AWG solid wire
cabling.
Press the Audio button on the B126-004 to switch to 7.1-channel
surround-sound audio.
can be extended up to 200 ft. from the source, or a 1080p (60 Hz)
signal up to 150 ft. from the source. Using a B126-1P0 or
B126-1P0-WP-1, a 1080i (60Hz) signal can be extended up to
100 ft. from the source, or a 1080p (60Hz) signal up to 50 ft.
(B126-004 only)
19
10/24/2011 10:01:23 AM
Advertisement
Table of Contents
