Tripp Lite B126-1P0-WP-1 Owner's Manual page 15

10
11
12
Note: An improper Equalization setting can cause the monitor not to
display a picture at all. Try each Equalization setting until an acceptable
picture is displayed.
201109206-93-3023-EN.indd 15
Standard Extender/Splitter Installation
Repeat step 9 for each additional monitor you are connecting.
Turn on the power to the HDMI source. The orange RJ45 LEDs
illuminate on the B126-002 and B126-004 to indicate the unit
is receiving a signal from the source. The screen should now be
displayed on the connected monitors.
If necessary, use the Equalization control on the B126-1A0 or
B126-1A0-WP-1 to adjust the video image.
15
10/24/2011 10:01:21 AM