Standard Extender Kit Installation - Tripp Lite B127F-1A1-MM-HH Owner's Manual

Standard Extender Kit Installation

1. Set the display to 30 Hz. Double-check the factory settings, as the
2. Ensure the input setting of your monitor is set at HDMI 2.0. Some
3. Verify your monitor has the HDR feature enabled. Some displays may
4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your
Note: If you are connecting a local monitor to your installation, the UHD Deep
Color setting may need to be disabled on your local TV/monitor (depending on the
make and model) to achieve 4K 60 Hz resolution.
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use duplex multimode fiber
cable, such as Tripp Lite N520-XXM Series Duplex Multimode LC-to-LC Fiber
Cable.
-03-230-933974.indb 4
Before installation, check the following settings of your
source(s) and TV/monitor(s):
default can be set to a lower frequency (Hz) than advertised.
displays may have the default setting at HDMI 1.4.
have this feature disabled as a factory setting.
TV/monitor. Confirm with your TV/monitor manufacturer which HDMI
ports support UHD Deep Color.
4
5/3/2019 9:37:21 AM