Video-In and Video-Out (S-Video Interface)
The S-Video interface is a standard mini-DIN connector.
Pin
Description
1
Ground
2
Ground
3
Luma
4
Chroma
5
Ground
6
Ground
AudioMate In
The AudioMate port (labelled
Microphone (ECM). It uses a special 8-pin mini-DIN connector and cable available from
VBrick. The
MIC IN
Pin
Description
1
No Connect
2
No Connect
3
Ground
4
Ground (Shield)
5
+12V DC Power
6
Optional Mic input (not used)
7
Mic Input
8
Speaker Reference
Audio In and Audio Out
The
ports are designed for use with a 1/8" mini plug. Cables are available for both
Audio In
balanced and unbalanced applications from electronics specialty stores (e.g. Radio Shack) and
from VBrick. For balanced operation, use a cable (see Figure 11) with a mini stereo plug
(Ground, - Signal, +Signal, High Impedance Input, 600 Ohm Output).
For standard, unbalanced, operation use a cable with a mini mono plug (Ground and +
Signal, High Impedance).
VBrick Appliance Getting Started Guide
) is designed for use with VBrick's Echo cancellation
MIC IN
internal pinouts are shown below.
I/O Type
N/C
N/C
GND
GND
Output
Input
Input
Output
VB6000 Reference
69