Table of Contents
Advertisement
Figure 7. Edit Mode
End Edit
Save Config
If the browser is closed after entering the Edit Mode, Editing will not be ended. Therefore, a
second user can't know if the first user has simply forgotten to log off or is still engaged in
editing. After an hour of inactivity, Edit Mode times out, whether the browser is open on the
desktop or closed without ending the Edit session. In IWS, the
side of the menu bar ends editing and logs you out of the application.
Rebooting
To to reset the VBrick appliance do one of the following:
1. Power the VBrick appliance up and down by removing and reinserting the power cord.
2. Press the
Reset Box
. This button is only available while in the
Diagnostic
VBrick Appliance Getting Started Guide
Ends the editing session and displays View mode.
button on the Integrated Web Server in any of the selections under
Integrated Web Server
Writes all applied changes to flash
memory. If you do not click Save
Config after editing, any changes you
made are lost if the appliance loses
power or is reset.
button on the right
Logout
mode.
Edit
37
Advertisement
Table of Contents
