Table of Contents
Advertisement
Mic In
Audio In Left/Right
Power In 24VDC
COM 1
COM 2 (Term)
Relay
Ethernet
LEDs
Power Out 12VDC
Figure 2. VBrick Network Appliance – Front Panel (Left to Right)
LCD Display
Infrared Sensor
Figure 3. Appliance Setup Schematic
Using the Quick Start Guide
A Quick Start Guide that explains how to set up the appliance is shipped with each device.
The Quick Start Guides explain how to setup the appliance so you can quickly verify that you
2
AudioMate microphone connection.
Audio in left and right channels.
Power input. LED illuminates when power is applied.
Dedicated serial port for Serial Port Passthrough.
Use to connect a terminal (or a PC running terminal emulation
software) in order to manage the appliance using HyperTerminal (see
Connecting with HyperTerminal on page 49). Optional serial port
for Serial Port Passthrough.
Use to control external devices.
Connect to the network.
Activity – indicates there is activity on the network.
Link – indicates the appliance is connected to the network.
10/100 – On indicates the link is running at 100 Mbps. Off indicates
the link is running at 10 Mbps.
Power output. Connect external devices such as a camera.
Shows IP Address, system status, error messages, and Edit state. Also
used with
on IR remote control.
Local Edit
Located between LCD and fan housing. Used for IR remote control.
© 2008 VBrick Systems, Inc.
Advertisement
Table of Contents
