Table of Contents
Advertisement
Key
Letters
Table 8. Front Panel Error Messages
Error Message
Edit in Progress
Syntax Err 1
Syntax Err 2
Out of Range
Invalid Gateway
Invalid IP16
Invalid IP17
Used Port
Assigned Port
Invalid Mask23
Invalid Mask24
Invalid Mask25
Other Errors
Table 9. Front Panel Dialog Windows
Dialog Window
Password
DHCP
Box IP Addr
Subnet Mask
42
Description
Letters for password and for responses. "6" corresponds to "n" for a
no response, "9" corresponds to "y" for a yes response.
Description
Edit session in progress; Sign off any SNMP/CLI/IWS edit sessions.
Syntax error.
Syntax error.
Value out of range.
Invalid Gateway Address or conflict with Gateway Address.
Attempt to enter IP with host ID equal to 0.
Attempt to enter broadcast address as IP.
Port in use.
Port has been assigned.
Subnet mask makes IP Address a broadcast address.
Subnet mask makes Gateway Address a broadcast address.
Subnet mask makes Gateway Address invalid.
Retry later. If error persists, contact VBrick Support Services.
Description
At this screen use the letter keys to enter in the current password
followed by the select key. Entering the operator password will not
allow you to change the IP Address, Subnet Mask, or Gateway IP.
Entering the case sensitive administrator password (admin) allows you
to change all of the configurable parameters.
Enable/Disable. If you enable DHCP (Dynamic Host Configuration
Protocol) the VBrick will reboot and attempt to obtain a dynamic IP
Address (6 = no, disable; 9 = yes, enable).
This screen will display the current IP Address of the VBrick. If the
current setting does not need to be modified press the select key.
Otherwise enter in the correct value followed by the select key.
This screen will display the current Subnet Mask of the VBrick. If the
current setting does not need to be modified press the select key.
Otherwise enter in the correct value followed by the select key.
© 2008 VBrick Systems, Inc.
Advertisement
Table of Contents
