Table of Contents
Advertisement
Program Guide
WM Remote Control
The IR remote shown below works with multiple VBrick products. The following text does
not describe all of the functions and controls. It describes only those controls which are functional
with the VB6000 WM Appliance.
48
– Lists all programs emitting Program Guide
Pro Guide
advertisements and currently available on the network. Pressing Pro
Guide again toggles to start/stop display.
Pro Guide + Select – Chooses the program to play. Pressing Pro Guide
again toggles to start and stop the display.
• Selecting Pro Guide allows you to make the following selections.
Once you have made a selection, depressing the Program Guide
button removes the menu from the screen.
• Up/Down – Scroll up or down through the selections.
• Select – Plays the selected program.
• Left – Plays the previous program selection in the Program Guide
list.
• Right – Plays the next program selection in the Program Guide.
• Prev Page – Page up.
• Next Page – Page down.
• Record – Selects Record Guide.
• Reset – Press twice within five seconds to reset the VBrick. The
appliance will reboot.
• Encoder Off/On – Turns the encoder off for privacy. Turns
off multicast and push; does not affect HTTP or RTSP server
functions.
• Local Edit – Enter or exit Front Panel Edit.
• Record – Starts/stops hard drive archiving. You cannot use this
command when IWS is in Edit mode.
• Send – Initiate an FTP transfer of the last archived file. You
cannot use this command when IWS is in Edit mode.
• Up – Function dependent.
• Down – Function dependent.
• Left – Function dependent.
• Right – Function dependent.
• Select – Function dependent.
• Prev Page – Function dependent.
• Next Page – Function dependent.
© 2008 VBrick Systems, Inc.
Advertisement
Table of Contents
