Serving Custom Asx And Html Files; Multiple Applies - VBrick Systems VB6000 Series Getting Started Manual

Multiple Applies

In Edit mode, on some screens it is possible to have more than one
necessary to make sure the correct
change is made. Using
available in other sections of that screen. Also, be sure to scroll down to the bottom of the
screen, to make sure all selections are visible. When there are dual encoders, each slot is configured
independently of the other.

Serving Custom ASX and HTML Files

VBrick WM appliances create and serve built-in .asx files that are used to launch streams.
VBrick appliances can also serve custom .html or .asx files that you create and store in Flash
memory on the VBrick's C: drive. For example, you may want to use the VBrick as a web
server to launch custom .html or .asx files. Custom .asx files are typically used for playlists;
custom .html files are useful for web pages that have an embedded media player. To support
this functionality, the appliance recognizes the following special file names. These special files
can be stored in Flash memory at
customized and served as necessary.
Custom1.asx
Custom2.asx
Custom3.asx
Custom4.asx
Custom5.asx
For example, you can create and save a file called
file name and will be available from the VBrick web server. The file
recognized and will not be served. Note that .asx files are text files that manage the streaming
of .asf files. They are very small (less than 1K) because they contain instructions and no data.
When a you click a link to an .asx file, the browser downloads it to the browser cache,
launches the Windows Media Player, and then starts streaming the file. When the Player
interprets the .asx file, it accesses the streaming media specified in the .asx file. The following
snippet shows typical content inside an .asx file:
<ASX VERSION="3">
<ENTRY>
<REF HREF="http://<Server_IP_Address>/videofile.wmv"/>
<REF HREF="http://<VBrick_IP_Address>:8080/vbrickvideo1"/>
</ENTRY>
</ASX>
VBrick Appliance Getting Started Guide
is used for the section of the screen in which the
Apply
on one section of the screen may change which settings are
Apply
ftp://admin@<VBrick_IP_Address>/WEB/
Custom1.html
Custom2.html
Custom3.html
Custom4.html
Custom5.html
Apply
that is recognized as a special
Custom1.html
Custom6.html
Integrated Web Server
button. It is
and can be
is not
39