Conference Guide - VBrick Systems VB6000 Series Getting Started Manual

Network video appliances
Hide thumbs Also See for VB6000 Series:
Table of Contents

Advertisement

Conference Guide

The IR remote control of Conferencing can be enabled or disabled on the Configuration:
Conferencing > Conferencing Setup page in IWS.
VBrick Appliance Getting Started Guide
– Display listing of .htm "billboard" pages available in the
Billboard
VBrick appliance. Files must be FTPed to the correct folder in order to
be seen. Pressing Billboard again toggles to start/stop display.
– Lists the VBricks set up to receive video conferencing.
Conference
Pressing Conference Guide again toggles to start/stop display. There
are two modes for Conference Guide. The first brings up a list of users
on the monitor. The following actions are possible in that mode:
• Up – Scroll up through the selections.
• Down – Scroll down through the selections.
• Prev Page – Page up.
• Next Page – Page down.
• Select – Attempt to connect to the highlighted user.
Once a connection is made, the second mode makes the following
selections possible:
• Previous – Toggle to previous call.
• Ans Call – Answer a call.
• Reject Call – Reject a call.
• Ring Rmt – Ring the remote.
• Ring-DIS – Disable local ringer.
• Ring-ENB – Enable local ringer.
• Hang Up – Disconnects a conference.
Using the IR Remote
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb4000 seriesVb5000 series

Table of Contents