Table of Contents
Advertisement
Connecting with Telnet
Ethernet VBricks can be managed remotely via industry-standard Telnet. The same suites of
menus that are displayed on a local terminal are instantly available over an IP network.
VBrick uses the standard Telnet port.
To login using Telnet.
1. Go to
Start > Run
2. Type
and press Return to display the menu options.
?
3. Type
open <ip_address>
4. Enter the Login name and Password. Default is admin and admin.
5. At the VBrick prompt, type ? to display the top-level commands.
50
and type
to open a Telnet window.
telnet
using the IP address of the Vbrick Appliance.
© 2008 VBrick Systems, Inc.
Advertisement
Table of Contents
