System Settings; Language; Design Variants; Pin Protection - Becker MAP PILOT Operating Manual

>>> SETTINGS

System settings

> D
You can change various basic settings for
the Becker® MAP PILOT.
> GB
> In the settings menu, select
> F
.
settings
> I
> E
> P
> NL
The system settings are displayed.
> DK

Language

> S
You can set the menu language and the
> N
language for the navigation announce-
ments.
> FIN
> Select
Language
> Select the desired language.
> TR
You can now choose the type of voice (e.g.
> GR
male or female voice) for some languages.
> Select the desired voice.
> PL
> CZ
> H
> RUS
50

Design variants

You can choose between two different
design variants for displaying the day
design.
System
> Select
settings.
> Select the desired variant.

Pin protection

You can create a freely definable security
code of between 4 and 10 digits in length
and enable/disable this security code.
Note:
When a security code is entered, your
Becker® MAP PILOT is linked with
your vehicle by means of this security
code. If your Becker® MAP PILOT is to
be used in a different vehicle, the security
in the system settings.
code must be entered.
For the entry or change of the security
code, the ignition of the vehicle must be
turned on.
> Select
tings.
in the system
Design variants
in the system set-
PIN protection
> Select to enable a security
Enable PIN
code.
> Enter the desired security code and con-
firm your entry with .
> Enter the security code again and con-
firm your entry with .
The security code is now enabled.
Select to disable a security
Disable PIN
code.
> Enter the correct security code and con-
firm your entry with .
The security code is now disabled.