As A Segment Switch - HP ProCurve 2610 Installation And Getting Started Manual

As a Segment Switch

Server with
Gigabit
Ethernet NIC
Switch 2610-48
Switch 2610-48
Twisted-pair
straight-through
cables to
end nodes
Figure 2-21. Segment network configuration
The 2610 Switches also work well as segment switches. That is, with their high
performance, they can be used for interconnecting network segments—
simply connect the network devices that form those segments to the 2610
Switches.
In the illustration above, two "Fast Ethernet" switches with PCs, printers, and
local servers attached, are both connected to a Switch 2610-48. The devices
attached to the two desktop switches can now communicate with each other
through the switch. They can also all communicate with the server that is
connected to a 1000Base-T port on the switch.
Sample Network Topologies for Non-PWR Switches
Category 5e twisted-pair straight-through or
crossover cable for 1000 Mbps connection to server
Category 5e twisted-pair straight-
through or crossover cable for 1000
Mbps connection to backbone
Gigabit
fiber-optic cable
PCs,
printers,
and local
servers
Installing the Switch
Switch 2610-48
2-29