■
Automatically negotiated full-duplex operation for the 10/100 and
10/100/1000 RJ-45 ports when connected to other auto-negotiating
devices—the mini-GBIC ports always operate at full duplex, unless a
100-FX SFP transceiver is installed. The 100-FX SFP transceiver can
operate at half duplex.
■
Easy management of the switches through several available interfaces:
•
console interface—a full featured, easy to use, VT-100 terminal
interface that is especially good for out-of-band switch management
or for Telnet access to the switch.
•
web browser interface—an easy to use built-in graphical interface
that can be accessed from common web browsers.
•
ProCurve Manager—an SNMP-based, graphical network
management tool that you can use to manage your entire network.
Support for the Spanning Tree Protocol to eliminate network loops
■
■
Support for up to 30 IEEE 802.1Q-compliant VLANs so you can divide the
attached end nodes into logical groupings that fit your business needs.
Download of new switch software for product enhancements or bug fixes.
■
Dual-speed fans to maintain cooling if the environment warms up on the
■
following switches:
•
Switch 2610-48 (J9088A)
•
Switch 2610-24/12PWR (J9086A)
•
Switch 2610-24-PWR (J9087A)
•
Switch 2610-48-PWR (J9089A)
■
Support for many advanced features to enhance network performance—
for a description, see the Management and Configuration Guide, which
is on the ProCurve Web site at www.hp.com/go/procurve/manuals. To
display the list of downloadable manuals, click on the following link:
HP ProCurve Switch 2610 Series.
(You may want to bookmark this Web page for easy access in the future.)
Introducing the Switch
Switch Features
1-13
Need help?
Do you have a question about the ProCurve 2610 and is the answer not in the manual?