Sample Network Topologies For Non-Pwr Switches; As A Desktop Switch - HP ProCurve 2610 Installation And Getting Started Manual

Installing the Switch

Sample Network Topologies for Non-PWR Switches

Sample Network Topologies for
Non-PWR Switches
This section shows a few sample network topologies in which the Switch 2610
is implemented. For more topology information, see the ProCurve networking
products Web site, www.hp.com/go/procurve/manuals.

As a Desktop Switch

Twisted-pair
straight-through
or crossover
cables
Figure 2-20. Basic desktop configuration
The 2610 Switches are designed to be used primarily as desktop switches to
which end nodes, printers, other peripherals, and servers are directly
connected, as shown in the above illustration. The end node devices are
connected to the switch by straight-through or crossover twisted-pair cables.
Either cable type can be used because of the Auto-MDIX feature on the 2610
Switches ports.
2-28
Switch 2610-48
Server
Gigabit
fiber-optic cable
to backbone
PCs and
peripherals