Rack Mounting The 2610-Pwr Switches - HP ProCurve 2610 Installation And Getting Started Manual

Installing the Switch
Installation Procedures

Rack Mounting the 2610-PWR switches

1.
Figure 2-4. Attaching large mounting brackets
W A R N I N G
For safe reliable installation, only use the screws provided in the
accessory kit to attach the mounting brackets to the switch.
N o t e
The mounting brackets have multiple mounting holes and can be rotated
allowing for a wide variety of mounting options. These include mounting the
switch so that its front face is flush with the face of the rack, or mounting it
in a more balanced position as shown in the illustration above.
2-10
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.