Battery Caution; Risk Of Electric Shock - Barco ClickShare Safety Manual

1. Safety
• Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the set and have it
checked by qualified service personnel before resuming operations.
• Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will prevent damage to the device due to lightning and AC power-line surges.
• Only use attachments/accessories specified by the manufacturer.

Battery caution

CAUTION: Risk of explosion when the battery is replaced by an incorrect type. Dispose of used batteries according to the waste
instructions.
ATTENTION : Risque d'explosion en cas d'usage d'une batterie non prévue pour cet appareil. Jetez les batteries usagées suivant
les règles de recyclage prévues.
W
ARNING
tions mentioned in the product documentation.
W
ARNING
installation modes.
Environment
Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious damage to it.
1.2 Service

Risk of electric shock

Do not open. To reduce the risk of electric shock, do not remove the cover. No user- serviceable parts inside. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
• When the power cord or plug is damaged or frayed.
• If liquid has been spilled into the equipment.
• If the product has been exposed to rain or water.
• If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are
covered by the operating instructions since improper adjustment of the other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to normal operation.
• If the product has been dropped or the cabinet has been damaged.
• If the product exhibits a distinct change in performance, indicating a need for service.
• Replacement parts: When replacement parts are required, be sure the service technician has used original BARCO replace-
ment parts or authorized replacement parts which have the same characteristics as the BARCO original part. Unauthorized
substitutions may result in degraded performance and reliability, fire, electric shock or other hazards. Unauthorized substitu-
tions may void warranty.
• Safety check: Upon completion of any service or repairs to this device, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
1.3 Heat and fire hazard
Heat and Fire Hazard
Warning – risk of fire: do not place flammable or combustible materials near the device!
Barco products are designed and manufactured to meet the most stringent safety regulations.
This device radiates heat on its external surfaces and from ventilation ducts during normal operation, which is both normal and
safe. Exposing flammable or combustible materials into close proximity of this device could result in the spontaneous ignition of that
material, resulting in a fire. For this reason, it is absolutely necessary to leave an "exclusion zone" around all external surfaces of
the device where no flammable or combustible materials are present. The exclusion zone must be not less than 40 cm (16") for all
Barco devices. Do not cover the device with any material while the it is in operation.
2
:
Ensure you understand and follow all safety guidelines, safety instructions, warnings and cau-
:
The mains power plug connected to the wall outlet must be easily accessible at all times for all
R5900005 CLICKSHARE 28/02/2013