Barco LED-PRO User Manual page 45

rëáåÖ=íÜÉ=jÉåì=póëíÉã
This section lists the rules and conventions for using LED-PRO's menu system. The figure
below illustrates a sample menu:
T E S T P A T T E R N
> Ra st er B ox
Figure 4-9. Test Pattern Menu (sample)
Please note the following important rules and conventions:
•
•
•
•
•
•
•
•
•
LED-PRO • User's Guide
T yp e
Dia gonal Mot ion
Pressing any of the buttons in the Menu Keys Section takes you directly to the
top level of the selected menu.
The top line names the current menu, in all capital letters.
Subsequent lines typically display two fields:
~
For a listed function, the left-hand field names the function and the right-
hand field is the function's current parameter or value.
~
For a listed sub-menu, the left-hand field names the sub-menu that you
can access, and the right-hand field displays the double arrow (>>),
indicating that a sub-menu is available.
The "navigation" cursor (>) in the left-hand column indicates the current line on
which action can be taken. This arrow "scrolls" as you rotate the knob.
Scrolling:
~
Turn the ADJUST knob counter-clockwise (CCW) to scroll down.
~
Turn the ADJUST knob clockwise (CW) to scroll up.
To enter a sub-menu, scroll to the desired line and press
Throughout this chapter, the term "select" is used as an
Note
abbreviation for "scroll to a selected menu line and press the
SEL button."
To change a parameter, scroll to the desired line and press
changes to the "edit" cursor (
To accept a parameter or value, press
navigation cursor.
Note You must press SEL to activate an LED wall function.
Processor functions generally update as you adjust them.
In the "edit" mode, to exit (or cancel) without changing the original parameter,
ESC
press .
Bu rst
O f f
O f f
Select the Raster Box field to ...
#
). Use the ADJUST knob to modify the parameter.
SEL
. The edit cursor changes back to the
4. Operation
Using the Menu System
SEL
.
SEL
. The cursor
31