Ocrst; Ocsav - Barco LED-PRO User Manual

_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
•
i`hme^pb==Ü=
•
•
•
l`kq=ååå
•
•
•
l`opq
•
•
l`p^s
•
•
146
type [1-2], V Lock | HV Lock
Query:
LCKMODE?
Returns the Lock To Source Mode and Type in the format
= mode type
LCKMODE 1 2 (Enable Lock To Source and set Type to HV Lock)
LCKMODE? (Queries Lock To Source Mode and Type)
Description: Sets Lock To Source Horizontal Phase
Parameters: h - H Phase [ (-Input H Total/2) - (+Input H Total/2) ]
Query:
LCKPHASE?
Returns the Lock To Source Horizontal Phase in the format
= h
LCKPHASE 150 (Set Lock To Source H Phase to 150)
LCKPHASE? (Queries Lock To Source H Phase)
Description: Adjust LED Wall Output Contrast.
Note Command is only applicable when LED Wall Ctrl = Local.
Parameters: nnn - Output Contrast (0% - 100%)
Query:
OCNT?
Returns the Output Contrast in the format
= nnn
OCNT 50 (Adjusts Output Contrast to 50%)
OCNT? (Queries Output Contrast)
Description: Reset Output Configuration.
Parameters: None
OCRST (Reset Output Configuration)
Description: Save Output Configuration to non-volatile memory.
Parameters: None
OCSAV (Save Output Configuration)
LED-PRO • User's Guide