Minmode; Minstat; Lockout; Logod - Barco LED-PRO User Manual

_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
jfkjlab
•
•
jfkpq^q
•
•
il`hlrq
•
•
ildla
•
•
ildli
•
•
ildlp
•
•
ildlf
•
•
qok=íóéÉ=å
•
156
Description: Set Minimum Delay Mode
Usage: MINMODE mode [0|1] disable|enable
Description: Query Minimum Delay Status
Usage: MINSTAT mode [0|1] disable|enable
Description: Locks and unlocks the front panel
Usage: LOCKOUT (0 = off, 1 = on)
Description: Delete Logo image from non-volatile memory. Selecting Black/
Logo channel will now display black.
Parameters: None
LOGOD (Delete saved Logo image.)
Description: Load current output image from non-volatile memory as Logo
image.
Parameters: None
LOGOL (Load current output image as Logo image.)
Description: Save current output image in non-volatile memory as Logo image.
Parameters: None
LOGOS (Save current output image as Logo image.)
Description: Query the stored Logo image resolution.
Parameters: None
LOGOI (Query Logo resolution.)
Description: Selects transition type when switching between input channels.
Transition delay is only applicable if the transition type selected is Fade to black /
Fade to logo. Fade to logo transition type only selectable if Logo has been stored
in non-volatile memory.
LED-PRO • User's Guide