Table of Contents
Advertisement
Software installation
Please refer to your application manuals for information on the
correct Palette and Drawing modes to select.
When the driver setup is complete, click the Finish button.
6.
The Barco Product Installation Wizard will now guide you through
the installation of MediCal QAWeb, MediCal Pro, or NioWatch,
BarcoMed SelfExam, and the Barco on-line documentation.
When the Setup complete message appears, select Reboot
7.
System Now and click Finish.
Automated display configuration
Once the drivers, software and documentation have been installed and
your system has been rebooted, the Barco Monitor Plug and Play
Software should automatically detect your Barco displays and attach
them to the desktop with the correct resolution. If the Barco Monitor
Plug and Play Software fails to detect your Barco displays or fails to
attach them to the desktop correctly please refer to the section, Setting
the resolution of your Nio display on page 91 in the Troubleshooting
section of this manual.
46
Figure 20
Nio systems
Advertisement
Table of Contents
