Barco Nio systems Installation & User Manual page 41

Display installation
• Bind the cables together above and under the foot, by means of
the 2 velcro strips attached to the inside of the foot cover
(packed inside the accessory box).
• At last, put the foot cover back in place.
To put the foot cover in place:
The foot cover is packaged separately in the accessory box. Unpack
1.
the foot cover.
Push the upper side of the cover onto the foot, so that the hooks
2.
inside the cover are positioned right under the bulges at the rear
of the foot.
Slide the cover upward while moving the lower side of the cover
3.
towards the foot.
Press the cover to the foot so that it makes a clicking sound.
4.
Nio systems
(2)
Figure 17:
41