Firmware Upgrade - Aztech 500Mbps 4-Port HomePlugAV Ethernet Adaptor User Manual

Firmware Upgrade

Use Firmware Upgrade to upgrade firmware of HomePlugAV. After upgrading the
firmware, HomePlugAV will still retain the same Private Network Name and MAC address
settings. Before you proceed with the upgrade, you need to have both the configuration
file (PIB extension) and the firmware file (NVM extension). You can download upgrade
files from the product's Web site.
Firmware Upgrade Firmware Upgrade
Firmware Upgrade Firmware Upgrade
To upgrade the firmware of a HomePlugAV:
1. Connect HomePlugAV to the computer where you are using HomePlugAV Utility.
2. Open HomePlugAV Utility.
3. Click Firmware Upgrade.
4. Click Browse to select the location of the configuration and firmware files. The
configuration file has a PIB extension while the firmware file has an NVM
extension. After you select the location of the configuration and firmware files,
the upgrade will immediately start.
User Manual
Page 35 of 42