Aztech 500Mbps 4-Port HomePlugAV Ethernet Adaptor User Manual page 18

User Manual
To confirm if the connection was established, check the LEDs. The Power LEDs
Powerline Activity LEDs
If the Powerline Activity LED
successful. You need to repeat the process again.
Step 5
Unplug HomePlug Z and then connect it to your Ethernet device using the Ethernet cables
from the product package. After connecting the Ethernet cable, plug HomePlug Z directly
to a wall outlet. An Ethernet-enabled device can be a router, computer, hub, gaming
console, IP phone, network printer, or IP TV set-top box.
Note: HomePlugAVs work best when connected directly to a power outlet. Avoid plugging it to a power Note: Note: Note:
strip or power extension. The other electrical devices in the power strip create noise that may affect the
performance of the HomePlug.
Page 18 of 42
on all HomePlugs are ON.
on HomePlug Z is off, this means the pairing was not
and the