Aztech 500Mbps 4-Port HomePlugAV Ethernet Adaptor User Manual page 12

User Manual
To create a Secured HomePlugAV network using Simple Connect:
Step 1
Plug your HomePlugAVs side by side where you can easily observe the LED behavior.
Upon connection, the LEDs will blink simultaneously and then the Power LED lights on
steadily.
Press the Simple Connect button of the HomePlugAV X for ten seconds. All LED will blink
indicating that the Private Network Name has been randomize.
Press the Simple Connect button of the HomePlugAV Y for ten seconds. All LED will blink
indicating that the Private Network Name has been randomize.
Page 12 of 42