Aztech 500Mbps 4-Port HomePlugAV Ethernet Adaptor User Manual page 13

Step 2
Press Simple Connect for two seconds on HomePlugAV X. After you release the button,
the Power LED will blink. If the Power LED
for two seconds.
Note: Do not press Simple Connect for more than 2 seconds. Note:
Note: Note:
Step 3
Press Simple Connect for two seconds on HomePlugAV Y. After you release the button,
the Power LED will blink. If the Power LED
for two seconds.
Make sure to press Simple Connect on HomePlugAV Y within two minutes after you press
Simple Connect on HomePlug X.
The LEDs on both devices will switch off and on twice to signify that they are paired with
another device.
Note: Do not press Simple Connect for more than 2 seconds Note:
Note: Note:
did not blink, press Simple Connect again
did not blink, press Simple Connect again
User Manual
Page 13 of 42