Aztech 500Mbps 4-Port HomePlugAV Ethernet Adaptor User Manual page 8

User Manual
Label Label
Label Label
Power Power Power Power
A
Ethernet LED Ethernet LED Ethernet LED Ethernet LED
B
Powerline Activity Powerline Activity
Powerline Activity Powerline Activity
C
Power Jack Power Jack Power Jack Power Jack
D
Simple Connect Button Simple C Simple C Simple C onnect Button onnect Button onnect Button
E
Ethernet Ports Ethernet Ports Ethernet Ports Ethernet Ports
F
Reset Button Reset Button Reset Button Reset Button
G
Page 8 of 42
Status Status Description/ Function Description/ Function
Status Status Description/ Function Description/ Function
Blinking When LED is blinking slowly in Green color HomePlugAV
slowly is on a Power Saving status.
Off No power.
On After Simple Connect is pressed for two
seconds, this LED will blink to confirm the
button press.
When Simple Connect is pressed for 10
seconds, this LED will blink to confirm the
Private Network Name reset.
Off An Ethernet device is not connected.
On - Green Connected to a Gigabit (1000Mbps) device.
On - Amber Connected to a Fast Ethernet (10/100Mbps) device.
Off Device is not connected to a HomePlugAV network.
On This LED remains on when the device is part of
a HomePlugAV network.
The LED color represents the connection rate
within the HomePlugAV network whether it is
good (red), better (amber), or best (green).
The LED flashes to indicate network activity.
Connecting the 4-Port HomePlugAV Power cable.
Press to create or join a HomePlugAV network. It can
also be used to reset the Private Network Name to a
random key.
Ethernet Port 1- Highest priority
Ethernet Ports 2-3 – Medium priority
Ethernet Port 4 – Lowest priority
Press for 3 seconds to reset to the factory default
settings. When you reset to the factory default, all your
configuration changes will be removed.