Info: Info Printouts - Avery Dennison ALX 720 User Manual

Operators Manual
ALX 720

6.2 INFO: Info printouts

In this submenu status prints for tests and output the machine condition could be done. Printout
is possible after initialisation of light barrier only. Preferably 200 mm long material of a width of
approx. 100 mm is to be used.
Status Report: Adjustment of parameters ____________________________ STA0
A printout can be made to obtain a survey on parameter adjustments specific to the user.
Logo Buffer, Memory Report _______________________________________ STA1
A printout of the logo addresses used can be made for logo buffer management. The unused
storage capacity for logo data storage depends on the plug in card. If no such card is plugged
in, the unused internal storage capacity of the printer is made available for logo storage.
Library : Fonts, barcodes and lines __________________________________ STA2
Print samples of all types installed.
Service Report ___________________________________________________ STA3
Test printout for check of feed roller, print head, and service parameters.
Material transparency is represented graphically. Subsequently insert material and depress
'FEED' key light barrier is initialised.
Print test used for punched media___________________________________DOT1
Special pattern to show broken dots. The endless test finish by pressing the ENTER key.
Print test for endless media ________________________________________DOT2
Special pattern to show broken dots. The endless test finish by pressing the ENTER key.
4/09 Page 64 Printer adjustment