Error Messages; Common Errors - Avery Dennison Monarch 9855 RFID Operator's Handbook Manual

E r r o r M e s s a g e s
You may receive the following types of error messages:
♦ Data Errors
♦ Communication Errors
Some errors numbered 400-438 and 500-574 are internal software errors.
Errors numbered 900-999 are hard printer failures. If you cannot clear an
error, turn off the printer, wait several seconds and then turn on the printer.
For a complete list of errors, refer to the Packet Reference Manual available
on our Web site. Call Service if you need additional assistance.
C o m m o n E r r o r s
Errors 001 to 405 and 429 to 435 are data errors. This type of error
indicates that incorrect data was sent to the printer, and the printer is
ignoring it. Your System Administrator should correct the packet and send it
back to the printer.
Error Description/Action
002 Name must be 1 to 8 characters (excluding non-printable control
characters) inside quotes.
005 Supply width is invalid.
018 Code page selection defined in the field must be 0 (Internal), 1
(ANSI), 100 (Macintosh), 101 (Wingdings), 102 (UNICODE), 103
(BIG5 for UNICODE), 104 (GB2312 for UNICODE), 105 (SJIS for
UNICODE), 106 (GB2312), 107 (BIG5), 437 (DOS Page 437), 850
(DOS Page 850), 852 (Latin 2), 855 (Russian), 857 (Turkish), 860
(Portuguese), 1250 (Latin 2), 1251 (Cyrillic), 1252 (Latin 1), 1253
(Greek), 1254 (Turkish), 1255 (Hebrew), 1256 (Arabic), 1257 (Baltic),
or 1258 (Vietnamese).
025 Data length is too long.
052 Data type in the RFID Data Field must be 0, 1, 2, or 3. Refer to the
Packet Reference Manual for more information.
053 The starting block in the RFID Data Field is invalid. Refer to the HF
(High Frequency) Application Notes for more information.
101 Format referenced by batch not in memory.
228 Memory class identifier is invalid. The identifier must be A (AFI), D
(DSFID), or E (EAS) for Option 64. Refer to the HF (High Frequency)
Application Notes for more information.
10-8 Operator's Handbook