Avery Dennison Monarch 9855 RFID Operator's Handbook Manual page 90

7. Rub the cotton swab across the supply sensor and die cut sensor and
remove any build-up.
8. Clean the build-up in the supply path.
9. Let the printer dry before you reload supplies.
10. Close the exit cover by pushing firmly on it. Both latches will click into
place.
11. Close the cover and printhead assembly.
12. Turn on the printer.
13. Press Feed/Cut to position the supply under the printhead. Resend your
format, batch, and check digit packets.
9-4 Operator's Handbook
Die Cut Sensor
Supply Sensor