Avery Dennison Monarch 9855 RFID Operator's Handbook Manual page 37

To change the setting, from the Main Menu, select Setup, Supply, then
Positioning. Then, follow these steps.
Press or
1.
POSITIONING
Print Pos
2. Press Enter/Pause. The current setting is displayed, for example:
Enter print pos
[-450/450]: +0
3. Press or
value (moves the image down);
4. Press Enter/Pause when the number you need appears. Press
Escape/Clear until you see the Main Menu.
until you see
to change the print position. Pressing
increases it (moves the image up).
decreases the
Setting Supply Options 4-9