The following configuration parameters have been modified or renamed:
Parameters PHYxDUPLEX and PHYxSPEED were combined. PHY1SPEED has been
●
renamed to PHY1_OPERATIONAL_MODE. This parameter now includes the current
duplex mode. PHY2SPEED has been renamed to PHY2_OPERATIONAL_MODE. This
parameter now includes the current duplex mode.
The OUTBOUND_SUBSCRIPTION_REQUEST_DURATION default value has been
●
changed to 86400 seconds. This parameter can now be set through the settings file.
The dimensions for SNTP_SYNC_INTERVAL and
●
SNTP_SYNC_RANDOMIZATION_INTERVAL have changed from seconds to minutes.
EXCHANGE_CONTACTS_ENABLED has been renamed to
●
USE_EXCHANGE_CONTACTS.
EXCHANGE_CALENDAR_ENABLED has been renamed to
●
USE_EXCHANGE_CALENDAR.
The default value definition of ENABLE_G726 has changed.
●
The default values and sidetone definitions of the audio parameters AUDIOSTHD and
●
AUDIOSTHS have been modified.
WAIT_FOR_REGISTRATION_TIMER can now be set through the settings file.
●
The following configuration parameters are no longer valid and have been removed:
PHY1DUPLEX
●
PHY2DUPLEX
●
INTER_DIGIT_DIALING_TIMEOUT_DURATION
●
Online Documentation
See the Avaya support site at
technical and end user documentation.
See
Appendix C: Related Documentation
such as those published by the Internet Engineering Task Force (IETF) and the International
Telecommunication Union (ITU).
http://www.avaya.com/support
for Web sites that list related, non-Avaya documents,
Online Documentation
for 9600 Series SIP IP Telephone
Issue 2 December 2007
9