Table of Contents
Advertisement
2. To change the Log or Remote Logging Enabled setting, press the Right (or Left)
navigation arrow to cycle through the valid settings. When changing the Remote Log Server
value, enter the IP Address to which syslog messages should be sent.
When changing the Log value, depending on the current value, the next sequential text
string or value is selected and displayed as the setting. For example, if the current value is
Alerts (1), pressing the Right navigation arrow changes the value to Critical (2). If the
current value is Debug (7), pressing the Right navigation arrow changes the value to
Emergencies (0).
3. Press Save to store the new setting and redisplay the Admin Procedures screen.
Logout
Use the following procedure to log off a telephone.
!
CAUTION:
Once a telephone is logged off, a password and extension might be needed to
CAUTION:
log back on.
1. When you select LOGOUT from the Admin Procedures Screen, the telephone displays a
confirmation screen asking if you are sure you want to log out.
2. Press No to return to the Admin Procedures screen without logging off the telephone. Press
Yes to unregister the telephone from the call server.
Reset System Values
Use the following procedure to reset all system initialization values to the application software
default values.
!
CAUTION:
This procedure erases all static information, without any possibility of recovering
CAUTION:
the data.
1. When you select RESET VALUES from the Admin Procedures Screen, the telephone
displays a confirmation screen asking if you are sure you want to reset the telephone.
2. Press No to return to the Admin Procedures screen without resetting the telephone. Press
Yes to start the telephone reset.
Issue 2 December 2007
Logout
39
Advertisement
Table of Contents
